The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares G5 Convert T3 T4 1000 SP Cali 2 Brakes

Sort by Title

Sort by Price

Page 7 of 9

1 2 3 4 5 6 7 8 9

Automatic Bleed Valve M10 Single Banjo Bolt

BRA41653 Universal Part

Dimensions:
M10 bolt with M6 bleed nipple

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover
1 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£33.00

INC VAT

£27.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Hose

BRA17885 Fits V35C, V50C, S3, T3, T3 Cali, Convert, G5, Le Mans 2

Dimensions:
42cm long

Brake pipe. Used to link rear master cylinder to splitter. Also used as pipe from front master cylinder on some models.

Original type rubber brakeline with chunky galvanized ends

This part is available by special order, request a quote

17658550 GU17658550 17 65 85 50
1765 8550 1765.8550 17.65.85.50

£33.60

INC VAT

£28.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brakeline Front Manifold to Front Master Cylinder

BRA14657 Fits 750S, 850T

Dimensions:
49cm long

Front right hand brake pipe linking yoke mounted splitter to handlebar master cylinder

Original type rubber brakeline with chunky galvanized ends

This part is available by special order, request a quote

14657500-z 14657500 GU14657500 14 65 75 00
1465 7500 1465.7500 14.65.75.00

£34.70

INC VAT

£28.92 EX VAT this is the price you will pay if you are ordering from outside the UK

Caliper Piston Set Brembo P08/F08

BRA11000 Fits 750S, S3, V7 Sport, 850/1000 ALL Models, Cali 1100 (1994-1997)

Dimensions:
38mm OD x 20mm

Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons

A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

£35.00

INC VAT

£29.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Fixed Brakeline Under Tank

BRA17587 Fits 1000 SP, S3, T3, T4, 1000 SP, Le Mans 1, Le Mans 2, Le Mans 3, Cali 2, Convert, G5

Dimensions:
72.5cm long

Fixed rigid brake pipe linking front and rear of linked system, located under fuel tank

Original type rigid brake line

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

17658750

£36.00

INC VAT

£30.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brakeline Rear

BRA18658 Fits 1000 SP, Le Mans 1, T3, 1000 SP, Le Mans 3, Cali 2, Cali 3 IE

Dimensions:
50cm long

Flexible brake pipe from linked master cylinder to proporting valve or rear manifold

Original type rubber brake line with chunky ends

This part is available by special order, request a quote

18658560

£36.00

INC VAT

£30.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Master Cylinder Reservoir Overhaul Kit PS15 Brembo

BRA14901 Fits Cali 1100 (frame nos to KC12446 and after KD12178), 850/1000 ALL Models, V35 ALL, V50 I, V50 II, V65 ALL, V75 (4 valves per cylinder), 850T, V7 Sport, 750S, S3

Dimensions:
58mm OD

Rubber insert and plastic cap for PS 15 Brembo rear master cylinder reservoir, this type does not have a level switch. Also fits round Brembo PS 17 master cylinder reservoirs

Only for brake fluid reservoirs mounted on the PS15 master cylinder. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820. Does not fit replica PS 15 master cylinders BRA10802 and BRA07338

Sorry this part is no longer available Sorry, this part is no longer available.

14661100 GU14661100 14 66 11 00
1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

this part is no longer available
Sorry this item is out of production

Brakeline Front LH Caliper to Fixed Pipe

BRA14851 Fits Le Mans 1, Cali 2

Dimensions:
71cm long

Front left hand brake pipe linking caliper to rigid pipe under fuel tank

Original type rubber brakeline with chunky galvanized ends

This part is available by special order, request a quote

14658851-z 14658851 GU14658851 14 65 88 51
1465 8851 1465.8851 14.65.88.51

£38.00

INC VAT

£31.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Rear Brake Pipe

BRA17650 Fits Le Mans 1, Le Mans 2, Le Mans 3, 1000 SP, Convert, Cali 2, G5, Mille GT, S3, T3, T3 Cali

Dimensions:
Length 239mm, ,15mm tip to under hex head

Steel fixed rear brake pipe with threaded connectors at each end

Rigid brake pipe

part in stock 1 in stock

17658650 GU17658650 17 65 86 50
1765 8650 1765.8650 17.65.86.50

£39.90

INC VAT

£33.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Brakeline Splitter To Rear Caliper Fixed Line

BRA17655 Fits 1000 SP, S3, T3, T4, 1000 SP, Mille GT, Le Mans 2, Le Mans 3, Cali 2, Convert, G5,

Dimensions:
38cm long

Rear brakeline from splitter or proportioning valve to rear caliper fixed pipe. Also used as lower front right hand pipe to caliper fixed pipe on T3

Original type rubber brakeline with chunky galvanized ends

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

17657550

£40.00

INC VAT

£33.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 7 of 9

1 2 3 4 5 6 7 8 9